Changing The Time On Your Phones

Directions For SBX IP Phone Systems

Time and date change must be at station 100 (programming phone).
While the handset is on the hook, press TRANS/PGM button.
Dial 0.
Dial 4.
Dial 1.
Dial 2 digit month.
Dial 2 digit day.
Dial 2 digit year.
Press HOLD button.
You will hear tone.
Dial 4 digit time (military time).
Press HOLD button.
You will hear tone.
Press SPEAKER button.
Change will take place immediately.

Directions For DVX, STS, & XTS Phone Systems

1. Without picking up the handset, dial 0.
2. This will make the programming phone ring.
3. If no phone rings, you are on the programming phone.
4. Without picking up the handset, dial 692.
5. Enter the time and date in this order:

2 digits for each entry
YY - 2 digit year
MM - 2 digit month
DD - 2 digit day
HH - 2 digit hour (REMEMBER 2:00 PM is 1400 military time)
MM - 2 digit minute

6. You will hear a confirmation tone.
7. Then press the ON/OFF key.
8. Change will take place immediately.

Directions For MBX Phone Systems

From attendant phone, press Trans/Prog key.
Press * #.
Press Trans/Prog key again.
Dial 233 on key pad.
Press Button #1 (this is not the number 1 on the key pad, it is the first flex button on the top left, usually the same as Line 1.
Enter time: HH MM (remember to use military time).
Press Button #2 (this is not the number 2 on the key pad, it is the second flex button on the top left, usually the same as Line 2.
Enter Date: DD MM YY.
Press OK.
Press Speaker button.
This will change the time and date system-wide.